Αισθητήρας για την μέτρηση εργαλείου 20mm



ATLSensor_2.jpgATLSensor_3.jpg   
Κωδικός προϊόντος: 16-0051

Βάρος: 0.048 Kg


€ 90,00


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Αμεσα Διαθέσιμο - (Ποσότητα: 5)
Show shipping cost estimation
Περιγραφή
 
Automatic tool measuring sensor / tool setter normal open (NO)
Output mode: A: NO (normally open)
Stroke: 5mm
Pre-trip: almost zero
Repeat positioning accuracy: 0.001mm (operation speed: 50-200mm / min)
Protection structure: IP67
Contact force: 1.5N
Contact material: hard alloy
Shell material: grinding 4S
Cable: 3mts (4 core cable Dia5) tensile strength 30N / Minimum bending radius R7
Protection tube: 1M (Minimum bending radius R25)
LED light: OFF under normally open work
Life: 3000000 times
Stroke exceeding alarm: Normally closed (distance measurement signal about 2.5mm) 
Outpoint rating DC24V 100mA (MAX) Recommended value 10mA (resistive load)