4 Axis USB CNC TB6560 Stepper Motor Driver Board 3.5A with MPG interface



12-0469_3.jpg12-0469_4.jpg12-0469_2.jpg  
Κωδικός προϊόντος: 12-0469

Βάρος: 0.323 Kg


€ 106,20


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Αμεσα Διαθέσιμο - (Ποσότητα: 1)
Show shipping cost estimation
Περιγραφή
 
4 Axis USB CNC TB6560 Stepper Motor Driver Board 3.5A with MPG interface
 

1.Support for 4-axis linkage, you can connect four stepper motor drives or servo drives

2. Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor

3. 4 general-purpose opto-couplers isolation input: can connect the limit switch, emergency stop switch, auto tool zero, home switch etc.

4. Support for connecting electronic handwheel

5. Have 0-10V signal output , you can use mach3 software to control the spindle motor speed.

6. 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device

7. 1 status LED, indicate connection status on the board.

8. Resolution 1, 1\2, 1\8, 1\16 micro stepping output

9. Four(or three) channels 3.5A adjustable output current for 2/4 phase bipolar stepper driver

10.Bulid with 4 outputs and 5 inputs

 

Manual