Hypertherm PMX 125 Power Source



hyperthermpmx125torch.jpghypertherm-torch.jpg   
Κωδικός προϊόντος: 10-0213

Βάρος: 49.000 Kg


€ 11.000,00


Στο παρόν προϊόν δεν ισχύει η αντικαταβολή.


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Διαθεσιμότητα (7-15 days)
Show shipping cost estimation
Περιγραφή
 
Input voltages
CSA
480/600 V, 3-PH, 50/60 Hz
CE
400 V, 3-PH, 50/60 Hz
CCC
380 V, 3-PH, 50/60 Hz
Input current @ 21.9 kW
300/400/480/600 V, 38/36/31/24 A
Output current
30 - 125 A
Rated output voltage
175 VDC
Duty cycle @ 40°C (104°F)
100% @ 125 A
Open circuit voltage (OCV)
400/600 CSA: 320 VDC
380 V CCC: 290 VDC
400 V CE: 305 VDC
Dimensions with handles
592 mm D; 274 mm W; 508 mm H (23.3" D; 10.8" W; 20.0" H)
Weight with 7.6 m (25) torch
480 V, 47,9 kg (105.7 lbs)
600 V, 47,5 kg (104.7 lbs)
380 V, 45,2 kg (99.6 lbs)
400 V, 48,9 kg (107.8 lbs)
Gas Supply
Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure
Cutting: 260 l/min (550 scfh) @5.9 bar (85 psi)
Gouging: 212 l/min (450 scfh) @4.1 bar (60 psi)
Input power cable length
3 m (10) *
Power supply type
Inverter - IGBT
Engine drive requirement
40 kW for full 125 A output
Certifications
CSA-certified for use in the Americas and Asia, except China.
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
Warranty
Power supplies have a 3-year warranty and torches a 1-year warranty.
*No power cord on some CCC models.
Engine-driven generator operation
Engine drive rating
System output current
Performance (arc stretch)
40 kW
125 A
Full
30 kW
125 A
Limited
30 kW
100 A
Full
25 kW
100 A
Limited
22.5 kW
75 A
Full
20 kW
75 A
Limited
20 kW
60 A
Full
15 kW
60 A
Limited
12 kW
40 A
Full
10 kW
40 A
Limited
10 kW
30 A
Full
8 kW
30 A
Limited
 
 
 






Αλλα προϊόντα

plasma-cnc_1.jpg

6.800,00 €
plasma-cnc_1.jpg

6.500,00 €
plasma-cnc_1.jpg

8.500,00 €
plasma-cnc_1.jpg

10.900,00 €