NEMA 23 Stepper Motor / 4,5A / 283oz-in or 2Nm / Integrate Closed Loop



Nema23_2nm_36V_closed loop_3.jpg    
Κωδικός προϊόντος: 12-0386

Βάρος: 1.047 Kg


€ 289,00


Οι τιμές δεν περιλαμβάνουν ΦΠΑ (24%)


        Αμεσα Διαθέσιμο - (Ποσότητα: 1)
Show shipping cost estimation
Περιγραφή
 
  • Integrated compact size for saving mounting space
  • Without losing step, High accuracy in positioning
  • 100% rated output torque 
  • Variable current control technology, High current efficiency
  • Small vibration, Smooth and reliable moving at low speed
  • Accelerate and decelerate control inside, Great improvement in smoothness of starting or stopping the motor
  • User-defined micro steps
  • No adjustment in general applications
  • Over current, over voltage and over position error protection
  • Green light means running while red light means protection or off line
 
Introduction
JMC IHSS57 Integrated Closed Loop Stepper Motor is all-in-one closed loop stepper system which integrates closed loop stepper motor with digital driver.
Servo control and digital stepper driving technology are perfectly merged into this smart system.
Optical encoder with high speed position sampling feedback of 50μs built inside, can help system avoid losing-step, greatly improve low-speed instability and reduces noise.
This Series products have the advantages of both stepper and servo, features in low heat, smooth motion, fast response, high speed and big torque output.
 
Typical applications
CNC, Printing, lazer, textile machine, etc.
 
 Input Voltage
 24~50VDC(36V Typical)
 Output Current
 4.5A 20KHz PWM
 Pulse Frequency max
 200K
 Communication rate
 57.6Kbps
 Protection
 l Over current peak value 8A±10%
 l Over voltage value 80V
 l The over position error range can be set through the HISU
  Environment
 Specifications
 Environment
 Avoid dust, oil fog and corrosive gases
 Operating Temperature
 70℃ MAX
 Storage Temperature
 -20℃~+65℃
 Humidity
 40~90%RH
 Cooling method
 Natural cooling or forced air cooling
 
Microstep Setting
The micro steps setting is in the following table,  while SW1、SW2、SW3、SW4 are all on, the internal default micro steps inside is activate,this ratio can be setting through the HISU.
 
 
Dial switch Micro steps
SW1
SW2
SW3
SW4
Default
on
on
on
on
800
off
on
on
on
1600
on
off
on
on
3200
off
off
on
on
6400
on
on
off
on
12800
off
on
off
on
25600
on
off
off
on
51200
off
off
off
on
1000
on
on
on
off
2000
off
on
on
off
4000
on
off
on
off
5000
off
off
on
off
8000
on
on
off
off
10000
off
on
off
off
20000
on
off
off
off
40000
off
off
off
off